Data

Documents

Other

Information

TIE ROD SYSTEM COMPONENTS

DATA SHEET

Back to Products

Home

Next Page

Previous Page

www.dichem.co.uk     sales@dichem.co.uk     Tel: 0118 989 2666    Fax: 0118 989 0929 

Back to Products

Home

Next Page

Previous Page

FORM-ANCHOR (Stainless Steel Grade 304)

The Form-Anchor is versatile, non-corrosive and is used mainly for the securing of Single Sided and Climbing Formwork Shutters. It is easily fixed by use of a pre-fitted locator, which also gives suitable cover to the rebar for making good when the Form-Anchor becomes redundant. No need for drilling of plywood as with many other systems. Can also be used for securing of Slab Edge Formwork, Guard Rails, etc. For use with 15mm Thru Tie Rods. Thread length 65mm, Failing Load 120Kn, Length 130mm Maximum Safe Working Load 50Kn

Wing Nuts

A 'Knock On' wing nut, self coloured to suit 15mm Tie Rod. Generally packed in 50's

Waler Plates

Pressed 120mm x 120mm x 10mm

Self coloured, Packed in 25's.         

Connection Nuts & Hex Nuts

Used for joining tie rods, complete with centre stop for equal spacing, self coloured to suit 15mm Tie Rod. Hex Nut for restricted access or locking nut.

Tie Rod 15mm

A standard Tie Rod specifcally designed for use with Formwork for all types of concrete structures. Custom lengths to order.

Weldable Anchors (Fitsch)

Metal anchors that can be welded to sheet piling, RSJ's etc. to accept 15mm tie rods. Anchors must be continuously welded all the way round - load tests should be conducted before use.

Rock Anchor  for 15mm Tie Rod

For securing single sided formwork to rock or concrete walls. Hole diameter required 35-37mm. Conduct tensile tests before applying final load.Technical details on request.

Water Barrier for 15mm tie Rod

Used in water retaining structures. Cast into the concrete wall between two separate rods. After pouring tie rods are removed and the water barrier remains in-situ. Two plastic reducers are required so that 22/26 Spacer Tube can be fitted.

20mm Tie Rod System :- We can also supply a range of accessories for 20mm Tie Rod. These include:- Tie Rod, Wing Nuts, Connector Nuts, Waler Plates, Tube, Cones, Water Barriers. Please call for availability and prices.

Cast in Stainless Anchor (Stainless Steel Grade 304)

Used mainly for the securing of Single Sided and Climbing Formwork Shutters. It is easily fixed by use of a pre-fitted locator, which also gives suitable cover to the rebar for making good when the Anchor becomes redundant. No need for drilling of plywood as with many other systems. Can also be used for securing of Slab Edge Formwork, Guard Rails, etc. For use with 15mm Thru Tie Rods

Thread length 65mm , Failing Load 90KN, Length 95mm

DATA SHEET

ZAP Scewlok Coupler

The Zap Screwlok couplers provide a cost-effective method of joining reinforcing bars. They are easy to install and achieve failure loads higher than 125% of the characteristic yield strength of grade 500 reinforcing bar. The bar ends are supported within the coupler by the V shape design, and as the lock shear bolts are tightened, the conical ends embed themselves into the bar, when the pre-determined tightening torque for the shear bolts is reached, the heads shear off, this gives an instant visual check of correct installation.

Available to connect bars from 12-50mm

MKK Cone

A special metal & plastic cone that is reusable. For use when tie rods have to be left in the concrete or for when a leading cone is used for climbing    shuttering. Fitted with  a built in centre pin. The cone is removable with the special spanner.

Permanent Tie bar length = WD-2c

Cone Dimensions :-

SKK Cone

A special steel cone for use with 15mm tie bar and M24 bolts in climbing shuttering situations. It is used  when a recess  has already been made with the MKK Cone above The SKK cone is tightened and released with a special spanner.

Excalibur Screwbolt             NEW Product

The Excalibur Screwbolt's unique twin helical thread ensures high tensile-shear-close to edge and centre spacing safe working loadings. It can also cut a thread into steel.  Excalibur Screwbolt's versatility enable it to replace virtually all the traditional masonry fasteners  currently available. The Screwbolt range of products have been and continue to be tested by the Imperial College London to UEAtc M.O.A.T 49 1992 standards. It makes an ideal re-usable push pull anchor. Other sizes are available to order.

DATA SHEET